(a)
Any Class III users subject to federal categorical standards, or
any Class III users at the discretion of the Director of Utilities,
as well as all Class IV users, shall be required to install and maintain
monitoring facilities to allow inspection, sampling and/or measurements
of the building sewer or plumbing systems and may also be required
to provide, install and operate sampling and/or metering equipment
at the user's expense. These facilities shall be normally situated
on the user's premises.
(b)
When one or more user can discharge into a common side sewer, the
Director of Utilities may require installation of a separate monitoring
facility for each user. Also, when in the judgment of the Director
of Utilities, there is a significant difference in wastewater constituents
and characteristics produced by different operations of a single user,
the Director of Utilities may require that separate monitoring facilities
be installed for each separate discharge.
(c)
If the monitoring facility is inside the user's fences, there shall
be accommodations to allow access for City personnel such as a gate
secured with a City lock. There shall be ample operating area in or
near such sampling points and equipment to allow accurate sampling
and compositing of samples for analysis. The user shall assure that
access and sampling and measuring equipment are maintained in a safe
and proper operating condition at all times at no expense to the City.
(d)
The sampling and monitoring facilities shall be provided in accordance
with the City's requirements and all applicable construction standards,
safety devices and specifications. Construction shall be completed
within 90 days following written notification to do so by the City.
(Prior Code § 20-52(B)(3)(d); Ord. 83-1054 § 1, eff. 6/16/83; Ord. 2005-01, eff. 3/3/05)